How to assemble Hand Sanitizer Dispenser Stand

First, check all components are complete: 

1. 1 Sanitizer dispenser
   
2. 1 Base
   
3. 1 Pole
   
4. 1 Drip tray
   
5. 1 Black plate
   
6. 1 Set of instructions
   
7. 1 bag of Tools and accessories
   

1. Connect the pole to the base with screw M8 and tighten the screw.

2. Connect the black plate to the pole with the screw M10 and tighten the screw.

3. Fix the drip tray to the dispenser with the screw M6. 

4. Install the dispenser onto the black plate with M4 nuts. 

5. Tighten the screws to finish. 

• Related Articles

• How to install and refill the automatic soap dispenser

  Installation 1. Use the key to open the front shell of the dispenser and put the dispenser on the wall. 2. Mark the position of the hole on the wall and then remove the dispenser. 3. Turn on the switch to adjust the flow. Bottom for a large output ...