How to install and refill the automatic soap dispenser

How to install and refill the automatic soap dispenser

Installation

1. Use the key to open the front shell of the dispenser and put the dispenser on the wall.


2. Mark the position of the hole on the wall and then remove the dispenser.


3. Turn on the switch to adjust the flow. Bottom for a large output and middle for a smaller one. 



Refilling

1. Turn off the dispenser before refilling. 
2. Open the cap of the bottle and refill with the sanitizer. 


3. Switch back to ON. 

    • Related Articles

    • How to assemble Hand Sanitizer Dispenser Stand

      First, check all components are complete:  1 Sanitizer dispenser 1 Base 1 Pole 1 Drip tray 1 Black plate 1 Set of instructions 1 bag of Tools and accessories 1. Connect the pole to the base with screw M8 and tighten the screw. 2. Connect the black ...

    • Installing Teamviewer on windows

      Below are the steps to install TeamViewer on your device to allow SignCast access remotely. Step 1 Go to https://get.teamviewer.com/signcast this is automatically start downloading our teamviewer client; if it doesn't please click the "Try Again" ...

    • How to install and connect to Mobile Teamviewer Android

      1. Download the file: TeamViewerHost.apk. https://download.teamviewer.com/download/TeamViewerHost.apk Transfer this file onto a USB drive. (fat32) 2. Insert the USB drive into the USB port on the back of the screen. 3. Once the screen is powered on, ...