Signcast 49in Kiosk User Guide - SM-49L-T-W

Signcast 49in Kiosk User Guide - SM-49L-T-W



1. After opening the case, attach the base of the kiosk to the bottom of the kiosk using 
the provided allen key and screws. 
                       

                
 
 
The kiosk comes with 1x power cable, 1x HDMI cable (extra) 1x keys, 1x allen key, and at 
least 12x screws.  
 
2. Once the base is secured, stand the kiosk upright and plug in the kiosk with the 
provided power cable.  
 
3. Now you can turn on the kiosk with the provided remote pointing at the kiosks IR 
sensor. This will power on the computer that is installed in the back of the kiosk inside 
the door. 





 
The remote is included in the box or might be located inside the back of the kiosk attached with Velcro.


 
 
The USB touch cable is connected to a USB SS port on the right side of the computer. The 
cables on the left side of the computer from top to bottom are: Computer power, WiFi, 
HDMI, and Ethernet at the bottom. You can plug an ethernet cable into the back of the 
 
Kiosk (RJ45 next to the power cable and switch). 
 
 
4.  Remote control functions 
 
●Top left (Red): Power button 
●Top right (Green): Volume mute 
●Loop button (next to 0 on number pad): Factory reset everything to Chinese. Do 
not press. 
●Input: Select the displays Input. Default to HDMI 3 
●Disp: No function 
●Zoom: No function 
●Sleep: No function 
●Exit: Exits menu 
●Menu: Opens up menu for display settings, colour setting, picture quality settings, 
etc. 
 
5. If you need to power on/off the computer manually, locate the computer in the back 
of the kiosk, and find the power button of the computer. You will find this on the bottom 
right corner of the computer when looking from the back as seen in the image below. 
Press the power button once to turn off. 
 


 
6. To load the computer with some new content, plug a USB stick with your content into 
one of the free USB ports of the computer located on the left side of the computer from 
the back of the kiosk. This should automatically open up the USB folder, or simply open 
your file explorer and find the USB drive on the left. Now you can import these files onto 
the desktop by drag and drop. 


 
 
7. You can connect the computer to WiFi or Ethernet easily by selecting the 
WiFi/Ethernet icon on the bottom right corner of the screen on the kiosk. WiFi should 
automatically be selected and you will just have to enter your WiFi password using 
either a wireless keyboard/mouse, or using the touch capability of the kiosk using either 
tablet mode, or enabling the touch keyboard. To enable the keyboard without tablet 
mode, simply right click or tap and hold the task bar and select "Show touch keyboard 
button".  
 
If you are using an Ethernet cable, you may have to change the adapter setting if it 
doesn't automatically change. Right click the WiFi icon in the bottom right corner, select 
Open Network & Internet Settings. Then select Change adapter options, then right click 
Ethernet, enable. 

    • Related Articles

    • SM-32P-T-B - Signcast 32" Touch Podium Kiosk

      3 kiosks sold on the 2359 - HARD-LINE Kiosk potential. References images for support: Back of the kiosk Screen Buttons view from the back of the kiosk looking from the floor to the back of the screen on the left side

    • Installing Signcast Studio onto an Android Screen

      1. Download the .APK file (signage-rel-version number.apk) to the USB flash drive (must be formatted to fat32). This White Labeled APK can be downloaded from: http://onsignage.com/downloads/ Look for the Android Icon as below: 2. Insert your USB ...

    • How to install and connect to Mobile Teamviewer Android

      1. Download the file: TeamViewerHost.apk. Transfer this file onto a USB drive. (fat32) 2. Insert the USB drive into the USB port on the back of the Philips screen. 3. Once the screen is powered on, use the remote to tap the home icon, then press 1888 ...

    • Program Makitso Remote Controller

    • Installing Teamviewer on windows

      Below are the steps to install TeamViewer on your device to allow SignCast access remotely. Step 1 Go to https://get.teamviewer.com/signcast this is automatically start downloading our teamviewer client; if it doesn't please click the "Try Again" ...